Provide an option for Room Names analogous to the "Conduit location" Option. Also consider other customization:
-Custom Room prefix - e.g. RM
-Option to include/exclude Name - e.g., RM 120
-Option to include/exclude Number - e.g., RM FIRE RISER
Room Names Location:
->Start of Circuit Description
->End of Circuit Description
Currently the room names always go at the end, just like OOTB Revit. Having the option to put the room at the start would allow for better scheduling for when the intent is for circuits to be organized by room, like so:
I would like to export from Revit to import into ComCheck similar to the AutoCAD version of Design Master Electrical8 votes
I do a lot of remodel work and it would be nice to be able to fill out a panel schedule with existing load data from a hard copy of an existing panel schedule without have to actually put the loads in the model and then circuiting them.1 vote
I won’t say never, but this feature would be quite difficult currently. We let Revit handle all the loads in the project. It really needs to be handled by Autodesk directly rather than by us.
Add an option to include a "1" in the wire callout before single ground and neutral wires. Currently the wire size is listed with no count before it.
Current wire callout:
1/2"C, 1#12, #12N, #12G
New wire callout:
1/2"C, 1#12, 1#12N, 1#12G1 vote
Adjust the wire size of feeders and branch circuits based on derating. This calculation needs to account for Ambient Temperature Correction Factors, Adjustment Factors and conduits on a roof (even though NEC 2017 eliminated this one). For example, there is an option in DME RT feeder sizing that asks about a double neutral. If we are acknowledging we need a double neutral, it should be understood the neutral is a current carrying conductor and should adjust the wire size and conduit size per the NEC.6 votes
have the branch circuits upsize wire based on the voltage drop or have a setting similar to what we have in AutoCAD.11 votes
We need a way to link two family instances together so that when you update one of the instances it updates the other.8 votes
If there was a way to have the export of one line diagrams go to drafting views instead of populating external dwgs?16 votes
I won’t say never, because that’s what we originally said about ever doing anything for Revit at all, and look where we are. However, this request is very unlikely. Using all the power of AutoCAD, we just barely are able to pull off a one-line that people are comfortable using. It would be a lot of work to do something in Revit that is half as good that likely no one would actually be happy using.
When exporting the one-line diagram from Revit to AutoCAD, assign the layer system used in AutoCAD to match the phase in Revit.10 votes
I am a design build Engineer/Contractor and would like to be able to get takeoff data.1 vote
Assign a unique ID to each feeder in a project that can be scheduled in Revit and displayed in the AutoCAD one-line diagram.1 vote
Add indoor point-by-point lighting calculations.18 votes
Add outdoor point-by-point calculations for parking lot lighting.12 votes
Be able to calculate the fault at equipment disconnects.1 vote
Change breaker size in Panel Schedule based on Revit family type parameter.33 votes
Be able to swap circuits in Revit like you can using the "Move Circuit" command in DM Electrical for AutoCAD.9 votes
Add "Panel Neutral" as a parameter to panels in Revit MEP.
Options for neutral would be:
This value would be a shared parameter for scheduling purposes. It would not be used in any calculations.3 votes
Be able to specify the fault at the upstream device, rather than at the current device. This feature would be useful when you want to specify the fault at the utility transformer but it is not included in the Revit model.0 votes
- Don't see your idea?