Having the ability to adjust the width of a schedule in the drawing model, instead of the schedule toolbox.

We have a large Building design Industrie. And all Arch and Eng companies are now changing from AutoCad to Revit but there is no good Software on the market for engineers to calculate electrical or HVAC Systems. An app for Revit for both will make it all better and faster. The potential could be in the millions.

Remove "DM HVAC", "DM Elec", and "DM Plumb" from AutoCAD window titlebar.

Include an option to print a "-" (a dash) in schedule cells if nothing is printed in them.

Detect room boundaries from the architect's XREF automatically and create rooms based upon it.

As the word of this software is increasing in Canada, it would be a good idea to have the capabilities of incorporating the Canadian Electrical Code into Design Master.

It would be a great tool if we can have the ability to import model information from Revit drawings which are done by architects. A simple feature would be importing the rooms. This would speed up the process and make designs happen faster.

Add an option to control the vertical alignment of text in schedule cells.

Currently everything is justified to the top of the cell. Make it so that text can be centered or at the bottom instead.

Add shortcut commands for commands. For example, "ML" for "Move Loop or Homerun" or "BC" for "Break Circuit".

It would be nice to be able to have multiple arrows for 1 piece of text pointing to different devices

When you hover (or float) your mouse over a DM device, display information about that device in a tooltip.

For DM Electrical, possible information would include callout and circuit number

For example, when I print an HVAC load calculation report, the many row entries can be difficult to follow visually across the screen. This obviously won't be useful in absolutely every case, but an option to have a little bgcolor="#EEEEEE" every other line would be awesome.

When a dialog box is moved, remember the location so that the next time it is opened, it is displayed in the same location.

Create an object enabler for Navisworks to allow the 3D ductwork, pipes, conduit, and cable tray to be viewed directly from the DWG without requiring it to be exported to an IFC file.

Many of our projects require custom device blocks. We also have blocks for US standards, European standards, Middle Eastern standards, etc. The Customization folder is a mess. It would be nice if DM searched this selected folder and all of it's subfolders for it's blocks without having to add them each to AutoCAD's support paths.

Nitpicky feature, but it would be nice to be able to use the object snaps when moving notes so they can be more easily lined up.

In the various DM schedules (light fixtures, receptacles, diffuser, etc), add the option to link the entry to a PDF file. The PDF could be opened from the schedule, or there could be an option to include it as a hyperlink on the device so it can be opened from the AutoCAD drawing.

If you could add the ability to create plan or keynotes to all devices and fixtures, you could eliminate some of the notes that occupy space beside them. Typically a hex box, circle would have the keynote number in it, which would refer you to a common list of notes on the edge of the space. Keeping them tied to the respective annotation layers may help keep them sortable by the entities on that sheet.

Add support for annotative scale factors for blocks and text. This would allow blocks and text to be the same size in different scaled viewports.