Add an option to control the vertical alignment of text in schedule cells.

Currently everything is justified to the top of the cell. Make it so that text can be centered or at the bottom instead.

Add an option for the default "max depth" value that is used when you insert a new duct. Currently it always starts at 24 and you have to remember to change it if you want something different.

This is similar to the 'end cap' command, but would draw a 'capped for future use' symbol on the end of a duct branch.

Have the ability to define a default device group name. In multi-phase projects it would be helpful to be able to set a group name as the default instead of having DM go to the "General" group.

Use different layers for new and existing circuits in panel schedules or new and existing equipment in equipment schedules.

DOOR STRIKE/DOOR CONTACT
CAMERA
MOTION SENSOR
CARD READER
KEYPAD

JUST A FEW EXAMPLES...

Be able to display feeder callouts with spaces after commas, instead of having all the wire sizes right next to each other.

Current Callout:
2''C,2#3/0,#3/0N,#6G

Desired Callout:
2''C, 2#3/0, #3/0N, #6G

Currently, the "Import Equipment from Another Project" command imports all the equipment. Update that function to allow you to choose specific pieces of equipment to import.

Add "Voltage Drop" as a column to the equipment schedule. Would list the branch circuit voltage drop to a each piece of equipment in the schedule.

Add a column to the receptacle schedule to show the load on the receptacle.

Display the rating of the disconnect and the rating of the fused on the drawing adjacent to the disconnect symbol.

It would be nice to have ribbon menu icon commands to turn the photometric layers on and off as well as automatically turn the respective layer back on after doing a recalc of either general or egress lighting.

A function similar to “Find Uncircuited” that finds elements that are circuited but have not been looped – “Find Unlooped” or something of that nature. I often am at risk of missing a dedicated receptacle or single equipment connection that I circuited, but missed when I was going through the looping/home run process.

Presently the equipment ID tag reverts to "world" orientation whenever it is moved or when you coordinate data base. Please make it subject to rotate text command, such that it stays in the orientation selected.

Add an option to include a "1" in the wire callout before single ground and neutral wires. Currently the wire size is listed with no count before it.

Current wire callout:
1/2"C, 1#12, #12N, #12G

New wire callout:
1/2"C, 1#12, 1#12N, 1#12G

Export the Energy Code Settings->Watts field from the light fixture schedule to Excel using the DM Electrical Excel Add-in.

Currently information on the equipment call out is all grouped together without separation. We have had this requested several times by our clients who would like this changed on our drawings. To currently meet this request we are spending to much time adjusting these individually.

Be able to create a custom table of impedance and XR ratio values for transformers based upon the kVA. Currently the default values are fixed. If you always use different values, you have to manually change them every time.

For panels smaller than 30" width, increase the panel clearance width to 30" automatically.