Aim Lamps Separately for Emergency Fixtures
For fixtures used in the outdoor and egress point-by-point photometrics with two lamps, we need to aim the lamp independently for correct photometrics.
Here's a link describing the workaround:
The current workaround for this problem, for anyone else viewing this feature request, is to insert a fixture on the drawing for each lamp you need to aim.
If you don't want to end up with incorrect fixture counts, you can create two different fixtures: one for the fixture and the load, and one for the lamps. Insert the fixture once and circuit that. Then, insert the lamp fixtures, one for each lamp and aim these. In the schedule, turn off the lamp fixtures so they do not appear.